Tools & Equipment: Difference between revisions

From HackPittsburgh Wiki
Jump to navigation Jump to search
m (→‎Power Tools: Removed reference to SawStop reminders. This is not a tool and is referenced in the page for the SawStop table saw.)
 
(24 intermediate revisions by 8 users not shown)
Line 1: Line 1:
Several recent donations have left us with a lot of stuff in the shop, some of it still not evaluated or categorized. While all the equipment is here for use in shop projects and by shop members, we have a few donations that are "Free to a Good Home". Other equipment should remain for common use.
If you have tools or equipment you'd like to donate, please review [[Donations]].


== Free To A Good Home ==
Some tools have special prerequisites before they can be used, such as training or extra safety precautions. See the [[Training]] page for details.
* A crap ton of CRT monitors.
* A large couch.
* A set of speakers.
* An electric stove


== Shelving Specs ==
See also [[:Category:Equipment]].
* Main Shelves (5 shelves, along the wall as you enter the shop):
** Height 14.25" clearance, except the second shelf up from the bottom has 17.5" of clearance, and there is just over 24" of clearance from the top shelf to the pipes.
** Depth: 24" of shelf proper, plus another 2.75" to the wall.
** Width: 44-46" between uprights, but shelves are open end-to-end.
* Book shelves to the left of the nook: (6 shelves + long top shelf (not measured))
** Height: 14", though each end of the shelf is only 12" (sideways 2x4 support for shelf above)
** Depth:16" of shelf proper, plus another 2"(ish) to the wall
** Width: 27" (barely)
* Utility Shelves to the right of the nook: (5 shelves + long top shelf (not measured))
** Height: 17" (bottom four shelves), 13" (5th shelf (below the long top shelf))
** Depth: 19.5" of shelf proper, plus another 2"(ish) to the wall
** Width:40" of shelf proper, plus another 1.5" to the whiteboard
* Small nook (5 shelves, between previous two shelves):
** Height: 13.75" (top shelf goes up into ceiling, not measured)
** Depth:24.5" of shelf proper, plus another 2"(ish) to the back wall
** Width: 51" support-to-support, plus about 1.5" on each side to the wall


== Current Inventory ==
=== Books ===
See the [[Books]] page


== Books ==
===CNCs===
Are cataloged in the [[Library]].
* [[Forest Scientific CNC Router]]
* [[Laser Cutter]]


== Current Inventory ==
===Electronics===
'''Ham Radio'''
*All sorts of [[ElectronicsShop]] supplies
*Radio Shack HTX-202 2 Meter Handie Talkie
*Alligator clips
**Needs to be charged and tested.
*Soldering guns
**Reminder: Ham Radio requires a license to transmit, but everyone can listen.
*Soldering stations
 
*De-soldering wicks (or tool)
'''Basic Hand Tools'''
*Tip cleaners
*Flat head screwdrivers
*Lighted Magnifying glass (boom style)
*Phillips screwdrivers
*Mini-vise and/or gator clip style
*Box cutters
*Surface Mount soldering equipment
*Tape measures
*Anti-static mats (optional if we're careful)
*Vise-Grips
*Wire stripper
*Saws
*Multimeters (many)
*Oscilloscopes (many)
*Logic Analyzer
*Bench power supplies
*Common components (LEDs, caps, resistors, wire, etc.)
*Various [[Microcontrollers]]


'''Table Tools'''
===Hand Tools===
*Drill Press
*Clamping: clamps, vise-grips
*Cutting: box cutters, cable saw, hand saws, nibbler, scissors, shears, tin snips, wire cutters
*Glue gun
*Heat gun
*Measuring: tape measures, yardsticks, rulers
*Hammers: claw, ball peen, mallet
*Layout: square, level, t-bevel
*Pliers: needle-nose
*Screwdrivers: flat head, phillips, right-angle, security
*Socket set: metric, standard
*Wrenches: allen/hex keys (standard+metric), open-end/box (standard+metric)


'''Miscellaneous'''
===Miscellaneous===
*Angle Grinder
*Assorted [[Hardware]]
*Welding machine
*Bunker Hill color security camera (wired)
*Coffee table
*Comfortable chairs
*Digital projectors (2)
*Digital projectors (2)
*8.25" table saw with fence; could use a push miter.
*Epoxy for RFID reader enclosure
*10" single-bevel miter saw
*Fridge - full sized
*Metal lathe
*Label maker
*Sony SCARA robot arm: can be freely gutted for parts
*LED flashlight
*Adept SCARA robot arm + controller: contact [[User:marek|Marek]] to discuss configuration for shop or project use
*Propane Torch for soldering copper pipe
*Pulleys/Block'n'Tackle
*Short/Step ladder
*Rolling toolchest
*Sawhorses


'''Advanced Tools'''
===Power Tools===
*Laser Cutter
* Angle Grinder
*3D Printer
* [[Band Saw]]
*Metal lathe
* [[Belt Sander]]
*CNC Router
* [[Bench Grinder]]
 
* [[Chop Saw]]
'''Electronics Tools'''
* [[20" Planer]]
*Multimeters (many)
* [[6" Jointer]]
*Oscilloscopes (many)
* Dremels
*Logic Analyzer
* [[Drill Press]]
*bench power supplies
* Electric Drills & Chargers
*common components (LEDs, caps, resistors, wire, etc.)
* [[Metal (horizontal) Band Saw]]
* [[Metal Lathe]]
* [[Mig Welder]]
* [[Mill]] Drill & Mill
* Sawzall
* [[Scroll Saw]]
* [[Sewing Machine]]
* [[Table Saw]]


== Just acquired ==
===Printers===
*Laser Cutter
* [[3D Printer]]
* [[3D Printer Folgertech I3 Reminders]]
* [[3D Printer Makergear M2 Reminders]]  OBSOLETE
* [[HP Design Jet 500 42" printer]]
* [[Laminator Reminders]]
* [[Vinyl Cutter]]


== Wish List ==
== Wish List ==
*CNC Mill
*CNC Mill
*Rotary table for a Manual/CNC Mill
*Plasma Cutter

Latest revision as of 08:02, 27 April 2023

If you have tools or equipment you'd like to donate, please review Donations.

Some tools have special prerequisites before they can be used, such as training or extra safety precautions. See the Training page for details.

See also Category:Equipment.

Current Inventory

Books

See the Books page

CNCs

Electronics

  • All sorts of ElectronicsShop supplies
  • Alligator clips
  • Soldering guns
  • Soldering stations
  • De-soldering wicks (or tool)
  • Tip cleaners
  • Lighted Magnifying glass (boom style)
  • Mini-vise and/or gator clip style
  • Surface Mount soldering equipment
  • Anti-static mats (optional if we're careful)
  • Wire stripper
  • Multimeters (many)
  • Oscilloscopes (many)
  • Logic Analyzer
  • Bench power supplies
  • Common components (LEDs, caps, resistors, wire, etc.)
  • Various Microcontrollers

Hand Tools

  • Clamping: clamps, vise-grips
  • Cutting: box cutters, cable saw, hand saws, nibbler, scissors, shears, tin snips, wire cutters
  • Glue gun
  • Heat gun
  • Measuring: tape measures, yardsticks, rulers
  • Hammers: claw, ball peen, mallet
  • Layout: square, level, t-bevel
  • Pliers: needle-nose
  • Screwdrivers: flat head, phillips, right-angle, security
  • Socket set: metric, standard
  • Wrenches: allen/hex keys (standard+metric), open-end/box (standard+metric)

Miscellaneous

  • Assorted Hardware
  • Bunker Hill color security camera (wired)
  • Coffee table
  • Comfortable chairs
  • Digital projectors (2)
  • Epoxy for RFID reader enclosure
  • Fridge - full sized
  • Label maker
  • LED flashlight
  • Propane Torch for soldering copper pipe
  • Pulleys/Block'n'Tackle
  • Short/Step ladder
  • Rolling toolchest
  • Sawhorses

Power Tools

Printers

Wish List

  • CNC Mill
  • Rotary table for a Manual/CNC Mill
  • Plasma Cutter
Retrieved from "https://wiki.hackpgh.org/index.php?title=Tools_%26_Equipment&oldid=4721"