3D Printer

From HackPittsburgh Wiki
Jump to: navigation, search


HackPittsburgh currently operates FIVE 3D printers.

PLA --> MendelMax*, Kossel* (delta)
PETG --> Coakley* (Cartesian)
ABS --> MatterHackers (Cartesian)
Resin --> Formlabs
* = You may bring your own filament instead of $0.05/gram cost.
** BOXZY has be assigned CNC milling duty. **

ALL PRINTERS REQUIRE TRAINING and ATTENDANCE to USE. Remember our club's #2 rule when using these printers. (Put away the filament after use and clean the area.)

Octoprint

The 3D printer station laptop uses Octoprint to manage multiple 3D printers.

For information on using Octoprint, see the details in 3D_Printer_Folgertech_I3_Reminders

For information on configuring Octoprint to support multiple printers, see Octoprint.

Kossel

Also see 3D_Printer_Folgertech_I3_Reminders

General

| Name = Kossel

| Current Status = Operational (manually- Octoprint is offline as of 8/17/2018)

| Owner = Group-owned, donated by Ryan Priore.

| Storage Location = 3D printer shelving area

| Make/Model = Folgertech Kossel

| Arrival Date = 2017

| Documentation = The build guide may be found here.

| Training Required = Yes, uses OctoPrint which is accessible from the local shop network (http://kossel3dprinter.lan). Need to build a new SD card for the Orange Pi One? General instructions can be found here.

| Rules = If you are not trained yourself, operation must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Ryan P., Chris Y., and Dave C. HackPGH asks that users donate $0.05 per gram of filament used. This is to replace the printer consumables like the filament. Please log your use and the condition after use.

Printer Specifications

Printing Size (Build Area; L x W x H) 170 mm x 170 mm (dia.) x 305 mm
Filament Types PLA
Filament Diameter 1.75 mm
Nozzle Size 0.4 mm
Hot End Maximum Temperature 245 degrees Celsius
Heated Bed Maximum Temperature 110 degrees Celsius
Maximum Print Speed 75 mm/s

Printer Profiles

Cura (0.2mm; 20% infill; no support) [1]
Cura (0.2mm; 20% infill; support) [2]

Kossel.JPG

MendelMax 1.5

General

| Name = MendelMax

| Current Status = Offline but available

| Owner = Group-owned, purchased with funds collected from far and wide.

| Storage Location = Against the wall near the bathroom

| Serial Number = N/A

| Make/Model = MendelMax 1.5

| Arrival Date = 2012

| Documentation = The MendelMax is an opensource, RepRap 3D printer.

| Training Required = Yes.

| Rules = If you are not trained yourself, operation of the MendelMax must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Ryan P. and Chris Y. HackPGH asks that users donate $0.XX per gram of filament used. This is to replace the printer consumables like filament.

| QR Code = TBD

Printer Specifications

Printing Size (Build Area; L x W x H) 215x215x95 mm (8.5x8.5x3.7 in)
Filament Types PLA, ABS, HIPS, PETG
Filament Diameter 1.75 mm
Nozzle Size 0.4 mm
Hot End Maximum Temperature 245 degrees Celsius
Heated Bed Maximum Temperature 110 degrees Celsius
Maximum Print Speed 75 mm/s

Printer Profiles

Cura Download
Repetier Host [Insert Link Here]

Instructions

FAQ

Coakley

General

| Name = Coakley

| Current Status = Operational

| Owner = Dave Coakley

| Storage Location = Against the wall near the bathroom

| Make/Model = Coakley

| Arrival Date = 2017

| Documentation = The TBA is an opensource, RepRap 3D printer.

| Training Required = Yes, uses octoprint, coakley3dprinter.lan

| Rules = If you are not trained yourself, operation must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Dave Coakley. HackPGH asks that users donate $0.05 per gram of filament used. This is to replace the printer consumables like filament. Please log your use and the condition after use.

Printer Specifications

Printing Size (Build Area; L x W x H) TBA mm (6x6x6 in)
Filament Types PETG
Filament Diameter 1.75 mm
Nozzle Size 0.4 mm
Hot End Maximum Temperature 245 degrees Celsius
Heated Bed Maximum Temperature 110 degrees Celsius
Maximum Print Speed 75 mm/s


MatterHackers

General

| Name = MatterHackers

| Current Status = Operational

| Owner = Chad Elish

| Storage Location = Against the wall near the bathroom

| Make/Model = Modified MatterHackers

| Arrival Date = 2017

| Documentation = The TBA is an opensource, RepRap 3D printer.

| Training Required = Yes, uses octoprint, da-vinci.lan

| Rules = If you are not trained yourself, operation must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Chad Elish. HackPGH asks that users donate $0.05 per gram of filament used. This is to replace the printer consumables like filament. Please log your use and the condition after use.

Printer Specifications

Printing Size (Build Area; L x W x H) TBA mm (6x6x6 in)
Filament Types ABS
Filament Diameter 1.75 mm
Nozzle Size 0.4 mm
Hot End Maximum Temperature 245 degrees Celsius
Heated Bed Maximum Temperature 110 degrees Celsius
Maximum Print Speed 75 mm/s

Matterhacker.JPG

FormLabs

General

| Name = FormLabs

| Current Status = Up and Running

| Owner = Group-owned, Donated by Paul Michael Design.

| Storage Location = Against the wall near the Tardis

| Serial Number = N/A

| Make/Model = FormLabs

| Arrival Date = 2018

| Documentation = http://www.formlabs.com

| Training Required = Yes. THIS IS VERY DANGEROUS.

| Rules = You must be trained and supervised in the event of a spill. Trainers who can get you trained are: Chad E. and Poppy. You must bring your own resin.

| QR Code = TBD

Printer Specifications

Printing Size (Build Area; L x W x H) TBA mm (TBA in)
Filament Types RESIN
Filament Diameter 1.75 mm
Nozzle Size 0.4 mm
Hot End Maximum Temperature 245 degrees Celsius
Heated Bed Maximum Temperature 110 degrees Celsius
Maximum Print Speed 75 mm/s

Printer Profiles

PreForm [3]

Instructions

FAQ

Formlabs-sla.jpg

Formlabs-plug.JPG