Tools & Equipment: Difference between revisions

From HackPittsburgh Wiki
Jump to navigation Jump to search
m (→‎Power Tools: Removed reference to SawStop reminders. This is not a tool and is referenced in the page for the SawStop table saw.)
 
(25 intermediate revisions by 8 users not shown)
Line 1: Line 1:
Several recent donations have left us with a lot of stuff in the shop, some of it still not evaluated or categorized. While all the equipment is here for use in shop projects and by shop members, we have a few donations that are "Free to a Good Home". Other equipment should remain for common use.
If you have tools or equipment you'd like to donate, please review [[Donations]].


== Free To A Good Home ==
Some tools have special prerequisites before they can be used, such as training or extra safety precautions. See the [[Training]] page for details.
* A crap ton of CRT monitors.
* A large couch.
* A set of speakers.
* An electric stove


== Shelving Specs ==
See also [[:Category:Equipment]].
* Main Shelves (5 shelves, along the wall as you enter the shop):
** Height 14.25" clearance, except the second shelf up from the bottom has 17.5" of clearance, and there is just over 24" of clearance from the top shelf to the pipes.
** Depth: 24" of shelf proper, plus another 2.75" to the wall.
** Width: 44-46" between uprights, but shelves are open end-to-end.
* Book shelves to the left of the nook: (6 shelves + long top shelf (not measured))
** Height: 14", though each end of the shelf is only 12" (sideways 2x4 support for shelf above)
** Depth:16" of shelf proper, plus another 2"(ish) to the wall
** Width: 27" (barely)
* Utility Shelves to the right of the nook: (5 shelves + long top shelf (not measured))
** Height: 17" (bottom four shelves), 13" (5th shelf (below the long top shelf))
** Depth: 19.5" of shelf proper, plus another 2"(ish) to the wall
** Width:40" of shelf proper, plus another 1.5" to the whiteboard
* Small nook (5 shelves, between previous two shelves):
** Height: 13.75" (top shelf goes up into ceiling, not measured)
** Depth:24.5" of shelf proper, plus another 2"(ish) to the back wall
** Width: 51" support-to-support, plus about 1.5" on each side to the wall
 
 
== Books ==
Are cataloged in the [[Library]].


== Current Inventory ==
== Current Inventory ==
'''Ham Radio'''
=== Books ===
*Radio Shack HTX-202 2 Meter Handie Talkie
See the [[Books]] page
**Needs to be charged and tested.
**Reminder: Ham Radio requires a license to transmit, but everyone can listen.
 
'''Basic Hand Tools'''
*Flat head screwdrivers
*Phillips screwdrivers
*Box cutters
*Tape measures
*Vise-Grips
*Saws
 
'''Table Tools'''
*Drill Press
 
'''Miscellaneous'''
*Angle Grinder
*Welding machine
*Digital projectors (2)
*8.25" table saw with fence; could use a push miter.
*10" single-bevel miter saw
*Metal lathe
*Sony SCARA robot arm: can be freely gutted for parts
*Adept SCARA robot arm + controller: contact [[User:marek|Marek]] to discuss configuration for shop or project use


'''Advanced Tools'''
===CNCs===
*Laser Cutter
* [[Forest Scientific CNC Router]]
*3D Printer
* [[Laser Cutter]]
*Metal lathe
*CNC Router


'''Electronics Tools'''
===Electronics===
*Multimeters (many)
*All sorts of [[ElectronicsShop]] supplies
*Oscilloscopes (many)
*Alligator clips
*Logic Analyzer
*bench power supplies
*common components (LEDs, caps, resistors, wire, etc.)
 
== Just acquired ==
*Laser Cutter
 
== Wish List ==
'''Misc. Shop Items'''
*Fridge - full sized
*coffee table
*comfortable chairs (ideally a rocker or glider)
 
'''Basic Hand Tools'''
*Hammers (claw, ball peen, mallet...)
*Hand Saws
*Pliers
*Needle-Nose Pliers
*Wire cutters
*Snips
*Hex (allen) wrenches (standard+metric)
*Square
*Level
*Clamps
*Glue Gun
*Heat Gun
*Label Maker
*2 small right angle screwdrivers
*2 6 pack Alligator clips
*1 pack 3" Colored Power Bit Set
*1 cable saw
*2 6-in-1 screwdrivers (double ended, double ended all the way!)
*1 32 piece 3" security bit set
*1 pack 5 misc. scissors
*1 bunker hill color security camera (wired)
*1 21 piece sae/metric combo 'go-thru' socket set
*3 50 piece misc. pegboard hooks
*2 5 pack 2" pegboard hooks
*1 200 piece spring assortment
*1 nibbling cutter
*1 8" T-Bevel
*1 aviation straight cut tin snips
*4 large spring clamps
*4 medium spring clamps
*4 small spring clamps
 
'''Electronics Tools'''
*Soldering guns
*Soldering guns
*Soldering stations
*Soldering stations
Line 117: Line 21:
*Tip cleaners
*Tip cleaners
*Lighted Magnifying glass (boom style)
*Lighted Magnifying glass (boom style)
*mini-vise and/or gator clip style
*Mini-vise and/or gator clip style
*toaster oven for surface mount boards?
*Surface Mount soldering equipment
*Anti-static mats (optional if we're careful)
*Anti-static mats (optional if we're careful)
*Wire stripper
*Wire stripper
*Multimeters (many)
*Oscilloscopes (many)
*Logic Analyzer
*Bench power supplies
*Common components (LEDs, caps, resistors, wire, etc.)
*Various [[Microcontrollers]]


'''Mechanics Tools'''
===Hand Tools===
*Socket Set: 1/4, 3/8, 1/2 drives (std. & metric)
*Clamping: clamps, vise-grips
*Open-end & box wretches (std. & metric)
*Cutting: box cutters, cable saw, hand saws, nibbler, scissors, shears, tin snips, wire cutters
*Glue gun
*Heat gun
*Measuring: tape measures, yardsticks, rulers
*Hammers: claw, ball peen, mallet
*Layout: square, level, t-bevel
*Pliers: needle-nose
*Screwdrivers: flat head, phillips, right-angle, security
*Socket set: metric, standard
*Wrenches: allen/hex keys (standard+metric), open-end/box (standard+metric)


'''Electric Hand Tools'''
===Miscellaneous===
*Electric Drills & Chargers
*Assorted [[Hardware]]
*Dremels
*Bunker Hill color security camera (wired)
*Scroll Saw
*Coffee table
*Comfortable chairs
*Digital projectors (2)
*Epoxy for RFID reader enclosure
*Fridge - full sized
*Label maker
*LED flashlight
*LED flashlight
'''Woodworking Tools'''
*Band Saw
*Scroll Saw
*10" Table Saw
*Jointer
*Planer
'''Metalworking Tools'''
*Portable/Battery Powered Sawzall
*Chop Saw (cutting metal)
*Band Saw
'''Miscellaneous'''
*Propane Torch for soldering copper pipe
*Propane Torch for soldering copper pipe
*Pegboard Hooks
*3"+ screws
*long throw screwdriver bits
*$1 4-bit interchangeable screwdriver
*Pulleys/Block'n'Tackle
*Pulleys/Block'n'Tackle
*Epoxy for RFID reader enclosure
*Short/Step ladder
*Short/Step ladder
*Scissors/Shears
*Drill w/gearbox/variable speed. 3/8" chuck w/ 1/2" adaptor.
*Rolling toolchest
*Rolling toolchest
*Sawhorses
*Sawhorses
===Power Tools===
* Angle Grinder
* [[Band Saw]]
* [[Belt Sander]]
* [[Bench Grinder]]
* [[Chop Saw]]
* [[20" Planer]]
* [[6" Jointer]]
* Dremels
* [[Drill Press]]
* Electric Drills & Chargers
* [[Metal (horizontal) Band Saw]]
* [[Metal Lathe]]
* [[Mig Welder]]
* [[Mill]] Drill & Mill
* Sawzall
* [[Scroll Saw]]
* [[Sewing Machine]]
* [[Table Saw]]
===Printers===
* [[3D Printer]]
* [[3D Printer Folgertech I3 Reminders]]
* [[3D Printer Makergear M2 Reminders]]  OBSOLETE
* [[HP Design Jet 500 42" printer]]
* [[Laminator Reminders]]
* [[Vinyl Cutter]]
== Wish List ==
*CNC Mill
*Rotary table for a Manual/CNC Mill
*Plasma Cutter

Latest revision as of 08:02, 27 April 2023

If you have tools or equipment you'd like to donate, please review Donations.

Some tools have special prerequisites before they can be used, such as training or extra safety precautions. See the Training page for details.

See also Category:Equipment.

Current Inventory

Books

See the Books page

CNCs

Electronics

  • All sorts of ElectronicsShop supplies
  • Alligator clips
  • Soldering guns
  • Soldering stations
  • De-soldering wicks (or tool)
  • Tip cleaners
  • Lighted Magnifying glass (boom style)
  • Mini-vise and/or gator clip style
  • Surface Mount soldering equipment
  • Anti-static mats (optional if we're careful)
  • Wire stripper
  • Multimeters (many)
  • Oscilloscopes (many)
  • Logic Analyzer
  • Bench power supplies
  • Common components (LEDs, caps, resistors, wire, etc.)
  • Various Microcontrollers

Hand Tools

  • Clamping: clamps, vise-grips
  • Cutting: box cutters, cable saw, hand saws, nibbler, scissors, shears, tin snips, wire cutters
  • Glue gun
  • Heat gun
  • Measuring: tape measures, yardsticks, rulers
  • Hammers: claw, ball peen, mallet
  • Layout: square, level, t-bevel
  • Pliers: needle-nose
  • Screwdrivers: flat head, phillips, right-angle, security
  • Socket set: metric, standard
  • Wrenches: allen/hex keys (standard+metric), open-end/box (standard+metric)

Miscellaneous

  • Assorted Hardware
  • Bunker Hill color security camera (wired)
  • Coffee table
  • Comfortable chairs
  • Digital projectors (2)
  • Epoxy for RFID reader enclosure
  • Fridge - full sized
  • Label maker
  • LED flashlight
  • Propane Torch for soldering copper pipe
  • Pulleys/Block'n'Tackle
  • Short/Step ladder
  • Rolling toolchest
  • Sawhorses

Power Tools

Printers

Wish List

  • CNC Mill
  • Rotary table for a Manual/CNC Mill
  • Plasma Cutter
Retrieved from "https://wiki.hackpgh.org/index.php?title=Tools_%26_Equipment&oldid=4721"