Small Vinyl Cutter Reminders: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Other Reminders Vinyl Cutter (Small) # Sure Cuts A Lot 4 Pro, on MacBook # ? Inst BT Material # Take cutter offline using "On Line" Button # Adjust Rollers ## Lift lev...") |
No edit summary |
||
| Line 2: | Line 2: | ||
Vinyl Cutter (Small) | Vinyl Cutter (Small) | ||
Other [[ Reminders ]] | |||
# Sure Cuts A Lot 4 Pro, on MacBook | Vinyl Cutter (Small) | ||
# | |||
# Take cutter offline using "On Line" Button | # use the program Sure Cuts A Lot 4 Pro, on the MacBook | ||
# Adjust Rollers | # Install BT Material (BT? Pretty sure this means vinyl) | ||
## Lift lever on back of cutter | ## Take cutter offline using "On Line" Button | ||
## Move material | ## Adjust Rollers | ||
## Press lever down | ### Lift lever on back of cutter | ||
# Any unused rollers, lift lever | ### Move material | ||
### Press lever down | |||
## Any unused rollers, lift lever | |||
# Use arrow button to zero head | # Use arrow button to zero head | ||
## Crosshairs button in center of arrows resets zero to current location | ## Crosshairs button in center of arrows resets zero to current location | ||
| Line 26: | Line 29: | ||
## buff transfer tape hard | ## buff transfer tape hard | ||
Note: transfer tape | Note: transfer tape: the idea is that you stick the vinyl letters, etc, to the tape, use the tape to peel the vinyl letters from the backing, then press the vinyl letters against whatever you want to stick them to. | ||
Revision as of 16:47, 24 January 2019
Other Reminders
Vinyl Cutter (Small) Other Reminders
Vinyl Cutter (Small)
- use the program Sure Cuts A Lot 4 Pro, on the MacBook
- Install BT Material (BT? Pretty sure this means vinyl)
- Take cutter offline using "On Line" Button
- Adjust Rollers
- Lift lever on back of cutter
- Move material
- Press lever down
- Any unused rollers, lift lever
- Use arrow button to zero head
- Crosshairs button in center of arrows resets zero to current location
- Zero location should be in lower, right corner of material
- Press the "On Line" button again to bring the machine online.
- make sure the screen says "on line"
- Back to MacBook
- Preview button, at top right
- Click the "Cutter" button, at top right
- dialog pops up
- usually take defaults
- when [cutting is?] complete, lift roller levers & remove [material?]
- "weed" the vinyl (peel away the material you don't want)
- apply transfer tape
- buff transfer tape hard
Note: transfer tape: the idea is that you stick the vinyl letters, etc, to the tape, use the tape to peel the vinyl letters from the backing, then press the vinyl letters against whatever you want to stick them to.