3D Printer
HackPittsburgh currently operates FIVE 3D printers.
PLA --> MendelMax*, Kossel* (delta) PETG --> Coakley* (Cartesian) ABS --> MatterHackers (Cartesian) Resin --> Formlabs * = You may bring your own filament instead of $0.05/gram cost. ** BOXZY has be assigned CNC milling duty. **
ALL PRINTERS REQUIRE TRAINING and ATTENDANCE to USE. Remember our club's #2 rule when using these printers. (Put away the filament after use and clean the area.)
Kossel
General
| Name = Kossel
| Current Status = Operational (manually- Octoprint is offline as of 8/17/2018)
| Owner = Group-owned, donated by Ryan Priore.
| Storage Location = 3D printer shelving area
| Make/Model = Folgertech Kossel
| Arrival Date = 2017
| Documentation = The build guide may be found here.
| Training Required = Yes, uses OctoPrint which is accessible from the local shop network (http://kossel3dprinter.lan). Need to build a new SD card for the Orange Pi One? General instructions can be found here.
| Rules = If you are not trained yourself, operation must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Ryan P., Chris Y., and Dave C. HackPGH asks that users donate $0.05 per gram of filament used. This is to replace the printer consumables like the filament. Please log your use and the condition after use.
Printer Specifications
Printing Size (Build Area; L x W x H) | 170 mm x 170 mm (dia.) x 305 mm |
---|---|
Filament Types | PLA |
Filament Diameter | 1.75 mm |
Nozzle Size | 0.4 mm |
Hot End Maximum Temperature | 245 degrees Celsius |
Heated Bed Maximum Temperature | 110 degrees Celsius |
Maximum Print Speed | 75 mm/s |
Printer Profiles
Cura (0.2mm; 20% infill; no support) | [1] |
---|---|
Cura (0.2mm; 20% infill; support) | [2] |
MendelMax 1.5
General
| Name = MendelMax
| Current Status = Offline but available
| Owner = Group-owned, purchased with funds collected from far and wide.
| Storage Location = Against the wall near the bathroom
| Serial Number = N/A
| Make/Model = MendelMax 1.5
| Arrival Date = 2012
| Documentation = The MendelMax is an opensource, RepRap 3D printer.
| Training Required = Yes.
| Rules = If you are not trained yourself, operation of the MendelMax must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Ryan P. and Chris Y. HackPGH asks that users donate $0.XX per gram of filament used. This is to replace the printer consumables like filament.
| QR Code = TBD
Printer Specifications
Printing Size (Build Area; L x W x H) | 215x215x95 mm (8.5x8.5x3.7 in) |
---|---|
Filament Types | PLA, ABS, HIPS, PETG |
Filament Diameter | 1.75 mm |
Nozzle Size | 0.4 mm |
Hot End Maximum Temperature | 245 degrees Celsius |
Heated Bed Maximum Temperature | 110 degrees Celsius |
Maximum Print Speed | 75 mm/s |
Printer Profiles
Cura | Download |
---|---|
Repetier Host | [Insert Link Here] |
Instructions
FAQ
Coakley
General
| Name = Coakley
| Current Status = Operational
| Owner = Dave Coakley
| Storage Location = Against the wall near the bathroom
| Make/Model = Coakley
| Arrival Date = 2017
| Documentation = The TBA is an opensource, RepRap 3D printer.
| Training Required = Yes, uses octoprint, coakley3dprinter.lan
| Rules = If you are not trained yourself, operation must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Dave Coakley. HackPGH asks that users donate $0.05 per gram of filament used. This is to replace the printer consumables like filament. Please log your use and the condition after use.
Printer Specifications
Printing Size (Build Area; L x W x H) | TBA mm (6x6x6 in) |
---|---|
Filament Types | PETG |
Filament Diameter | 1.75 mm |
Nozzle Size | 0.4 mm |
Hot End Maximum Temperature | 245 degrees Celsius |
Heated Bed Maximum Temperature | 110 degrees Celsius |
Maximum Print Speed | 75 mm/s |
MatterHackers
General
| Name = MatterHackers
| Current Status = Operational
| Owner = Chad Elish
| Storage Location = Against the wall near the bathroom
| Make/Model = Modified MatterHackers
| Arrival Date = 2017
| Documentation = The TBA is an opensource, RepRap 3D printer.
| Training Required = Yes, uses octoprint, da-vinci.lan
| Rules = If you are not trained yourself, operation must be done under the supervision of one of the trained operators. Trainers who can get you trained are: Chad Elish. HackPGH asks that users donate $0.05 per gram of filament used. This is to replace the printer consumables like filament. Please log your use and the condition after use.
Printer Specifications
Printing Size (Build Area; L x W x H) | TBA mm (6x6x6 in) |
---|---|
Filament Types | ABS |
Filament Diameter | 1.75 mm |
Nozzle Size | 0.4 mm |
Hot End Maximum Temperature | 245 degrees Celsius |
Heated Bed Maximum Temperature | 110 degrees Celsius |
Maximum Print Speed | 75 mm/s |
FormLabs
General
| Name = FormLabs
| Current Status = Up and Running
| Owner = Group-owned, Donated by Paul Michael Design.
| Storage Location = Against the wall near the Tardis
| Serial Number = N/A
| Make/Model = FormLabs
| Arrival Date = 2018
| Documentation = http://www.formlabs.com
| Training Required = Yes. THIS IS VERY DANGEROUS.
| Rules = You must be trained and supervised in the event of a spill. Trainers who can get you trained are: Chad E. and Poppy. You must bring your own resin.
| QR Code = TBD
Printer Specifications
Printing Size (Build Area; L x W x H) | TBA mm (TBA in) |
---|---|
Filament Types | RESIN |
Filament Diameter | 1.75 mm |
Nozzle Size | 0.4 mm |
Hot End Maximum Temperature | 245 degrees Celsius |
Heated Bed Maximum Temperature | 110 degrees Celsius |
Maximum Print Speed | 75 mm/s |
Printer Profiles
Cura | Download |
---|---|
Repetier Host | [Insert Link Here] |