Tools & Equipment: Difference between revisions

From HackPittsburgh Wiki
Jump to navigation Jump to search
m (Added link to microcontrollers page)
(A little reorg)
Line 1: Line 1:
Several recent donations have left us with a lot of stuff in the shop, some of it still not evaluated or categorized. While all the equipment is here for use in shop projects and by shop members, we have a few donations that are "Free to a Good Home". Other equipment should remain for common use.
If you have tools or equipment you'd like to donate, please review the [[Rules_and_Regulations|donation rules]].
 
Some tools have special prerequisites before they can be used, such as training or extra safety precautions. See the [[Training]] page for details.


== Free To A Good Home ==
== Free To A Good Home ==
If you know of someone that could use any of these items, please take them out of the shop:
* A crap ton of CRT monitors.
* A crap ton of CRT monitors.
* A large couch.
* A large couch.
Line 7: Line 10:
* An electric stove
* An electric stove


== Shelving Specs ==
== Current Inventory ==
* Main Shelves (5 shelves, along the wall as you enter the shop):
===Advanced Tools===
** Height 14.25" clearance, except the second shelf up from the bottom has 17.5" of clearance, and there is just over 24" of clearance from the top shelf to the pipes.
Many of these require [[Training]] before use.
** Depth: 24" of shelf proper, plus another 2.75" to the wall.
*Laser Cutter
** Width: 44-46" between uprights, but shelves are open end-to-end.
*3D Printer
* Book shelves to the left of the nook: (6 shelves + long top shelf (not measured))
*Metal lathe
** Height: 14", though each end of the shelf is only 12" (sideways 2x4 support for shelf above)
*CNC Router
** Depth:16" of shelf proper, plus another 2"(ish) to the wall
** Width: 27" (barely)
* Utility Shelves to the right of the nook: (5 shelves + long top shelf (not measured))
** Height: 17" (bottom four shelves), 13" (5th shelf (below the long top shelf))
** Depth: 19.5" of shelf proper, plus another 2"(ish) to the wall
** Width:40" of shelf proper, plus another 1.5" to the whiteboard
* Small nook (5 shelves, between previous two shelves):
** Height: 13.75" (top shelf goes up into ceiling, not measured)
** Depth:24.5" of shelf proper, plus another 2"(ish) to the back wall
** Width: 51" support-to-support, plus about 1.5" on each side to the wall
 


== Books ==
=== Books ===
Are cataloged in the [[Library]].
Are cataloged in the [[Library]].


== Current Inventory ==
===Ham Radio===
'''Ham Radio'''
*Radio Shack HTX-202 2 Meter Handie Talkie
*Radio Shack HTX-202 2 Meter Handie Talkie
**Needs to be charged and tested.
**Needs to be charged and tested.
**Reminder: Ham Radio requires a license to transmit, but everyone can listen.
**Reminder: Ham Radio requires a license to transmit, but everyone can listen.


'''Basic Hand Tools'''
===Powered Hand Tools===
*Electric Drills & Chargers
*Dremels
*Scroll Saw
*LED flashlight
 
===Basic Hand Tools===
*Flat head screwdrivers
*Flat head screwdrivers
*Phillips screwdrivers
*Phillips screwdrivers
Line 42: Line 39:
*Vise-Grips
*Vise-Grips
*Saws
*Saws
'''Table Tools'''
*Drill Press
'''Miscellaneous'''
*Angle Grinder
*Welding machine
*Digital projectors (2)
*8.25" table saw with fence; could use a push miter.
*10" single-bevel miter saw
*Metal lathe
*Sony SCARA robot arm: can be freely gutted for parts
*Adept SCARA robot arm + controller: contact [[User:marek|Marek]] to discuss configuration for shop or project use
'''Advanced Tools'''
*Laser Cutter
*3D Printer
*Metal lathe
*CNC Router
'''Misc. Shop Items'''
*Fridge - full sized
*coffee table
*comfortable chairs (ideally a rocker or glider)
'''Basic Hand Tools'''
*Hammers (claw, ball peen, mallet...)  
*Hammers (claw, ball peen, mallet...)  
*Hand Saws
*Hand Saws
Line 99: Line 70:
*4 medium spring clamps
*4 medium spring clamps
*4 small spring clamps
*4 small spring clamps
*Socket Set: 1/4, 3/8, 1/2 drives (std. & metric)
*Open-end & box wretches (std. & metric)


'''Electronics Tools'''
===Woodworking===
*Band Saw
*Scroll Saw
*10" Table Saw
*Jointer
*Planer
 
===Metalworking===
*Portable/Battery Powered Sawzall
*Chop Saw (cutting metal)
*Band Saw
*Drill Press
 
===Electronics===
*Soldering guns
*Soldering guns
*Soldering stations
*Soldering stations
Line 117: Line 103:
*Various [[Microcontrollers]]
*Various [[Microcontrollers]]


'''Mechanics Tools'''
===Miscellaneous===
*Socket Set: 1/4, 3/8, 1/2 drives (std. & metric)
*Angle Grinder
*Open-end & box wretches (std. & metric)
*Welding machine
 
*Digital projectors (2)
'''Electric Hand Tools'''
*8.25" table saw with fence; could use a push miter.
*Electric Drills & Chargers
*10" single-bevel miter saw
*Dremels
*Metal lathe
*Scroll Saw
*Sony SCARA robot arm: can be freely gutted for parts
*LED flashlight
*Adept SCARA robot arm + controller: contact [[User:marek|Marek]] to discuss configuration for shop or project use
 
'''Woodworking Tools'''
*Band Saw
*Scroll Saw
*10" Table Saw
*Jointer
*Planer
 
'''Metalworking Tools'''
*Portable/Battery Powered Sawzall
*Chop Saw (cutting metal)
*Band Saw
 
'''Miscellaneous'''
*Propane Torch for soldering copper pipe
*Propane Torch for soldering copper pipe
*Pegboard Hooks
*Pegboard Hooks
Line 152: Line 124:
*Rolling toolchest
*Rolling toolchest
*Sawhorses
*Sawhorses
 
*Fridge - full sized
== Just acquired ==
*coffee table
*Laser Cutter
*comfortable chairs (ideally a rocker or glider)


== Wish List ==
== Wish List ==
*CNC Mill
*CNC Mill
== Shelving Specs ==
* Main Shelves (5 shelves, along the wall as you enter the shop):
** Height 14.25" clearance, except the second shelf up from the bottom has 17.5" of clearance, and there is just over 24" of clearance from the top shelf to the pipes.
** Depth: 24" of shelf proper, plus another 2.75" to the wall.
** Width: 44-46" between uprights, but shelves are open end-to-end.
* Book shelves to the left of the nook: (6 shelves + long top shelf (not measured))
** Height: 14", though each end of the shelf is only 12" (sideways 2x4 support for shelf above)
** Depth:16" of shelf proper, plus another 2"(ish) to the wall
** Width: 27" (barely)
* Utility Shelves to the right of the nook: (5 shelves + long top shelf (not measured))
** Height: 17" (bottom four shelves), 13" (5th shelf (below the long top shelf))
** Depth: 19.5" of shelf proper, plus another 2"(ish) to the wall
** Width:40" of shelf proper, plus another 1.5" to the whiteboard
* Small nook (5 shelves, between previous two shelves):
** Height: 13.75" (top shelf goes up into ceiling, not measured)
** Depth:24.5" of shelf proper, plus another 2"(ish) to the back wall
** Width: 51" support-to-support, plus about 1.5" on each side to the wall

Revision as of 10:20, 11 August 2018

If you have tools or equipment you'd like to donate, please review the donation rules.

Some tools have special prerequisites before they can be used, such as training or extra safety precautions. See the Training page for details.

Free To A Good Home

If you know of someone that could use any of these items, please take them out of the shop:

  • A crap ton of CRT monitors.
  • A large couch.
  • A set of speakers.
  • An electric stove

Current Inventory

Advanced Tools

Many of these require Training before use.

  • Laser Cutter
  • 3D Printer
  • Metal lathe
  • CNC Router

Books

Are cataloged in the Library.

Ham Radio

  • Radio Shack HTX-202 2 Meter Handie Talkie
    • Needs to be charged and tested.
    • Reminder: Ham Radio requires a license to transmit, but everyone can listen.

Powered Hand Tools

  • Electric Drills & Chargers
  • Dremels
  • Scroll Saw
  • LED flashlight

Basic Hand Tools

  • Flat head screwdrivers
  • Phillips screwdrivers
  • Box cutters
  • Tape measures
  • Vise-Grips
  • Saws
  • Hammers (claw, ball peen, mallet...)
  • Hand Saws
  • Pliers
  • Needle-Nose Pliers
  • Wire cutters
  • Snips
  • Hex (allen) wrenches (standard+metric)
  • Square
  • Level
  • Clamps
  • Glue Gun
  • Heat Gun
  • Label Maker
  • 2 small right angle screwdrivers
  • 2 6 pack Alligator clips
  • 1 pack 3" Colored Power Bit Set
  • 1 cable saw
  • 2 6-in-1 screwdrivers (double ended, double ended all the way!)
  • 1 32 piece 3" security bit set
  • 1 pack 5 misc. scissors
  • 1 bunker hill color security camera (wired)
  • 1 21 piece sae/metric combo 'go-thru' socket set
  • 3 50 piece misc. pegboard hooks
  • 2 5 pack 2" pegboard hooks
  • 1 200 piece spring assortment
  • 1 nibbling cutter
  • 1 8" T-Bevel
  • 1 aviation straight cut tin snips
  • 4 large spring clamps
  • 4 medium spring clamps
  • 4 small spring clamps
  • Socket Set: 1/4, 3/8, 1/2 drives (std. & metric)
  • Open-end & box wretches (std. & metric)

Woodworking

  • Band Saw
  • Scroll Saw
  • 10" Table Saw
  • Jointer
  • Planer

Metalworking

  • Portable/Battery Powered Sawzall
  • Chop Saw (cutting metal)
  • Band Saw
  • Drill Press

Electronics

  • Soldering guns
  • Soldering stations
  • De-soldering wicks (or tool)
  • Tip cleaners
  • Lighted Magnifying glass (boom style)
  • mini-vise and/or gator clip style
  • toaster oven for surface mount boards?
  • Anti-static mats (optional if we're careful)
  • Wire stripper
  • Multimeters (many)
  • Oscilloscopes (many)
  • Logic Analyzer
  • bench power supplies
  • common components (LEDs, caps, resistors, wire, etc.)
  • Various Microcontrollers

Miscellaneous

  • Angle Grinder
  • Welding machine
  • Digital projectors (2)
  • 8.25" table saw with fence; could use a push miter.
  • 10" single-bevel miter saw
  • Metal lathe
  • Sony SCARA robot arm: can be freely gutted for parts
  • Adept SCARA robot arm + controller: contact Marek to discuss configuration for shop or project use
  • Propane Torch for soldering copper pipe
  • Pegboard Hooks
  • 3"+ screws
  • long throw screwdriver bits
  • $1 4-bit interchangeable screwdriver
  • Pulleys/Block'n'Tackle
  • Epoxy for RFID reader enclosure
  • Short/Step ladder
  • Scissors/Shears
  • Drill w/gearbox/variable speed. 3/8" chuck w/ 1/2" adaptor.
  • Rolling toolchest
  • Sawhorses
  • Fridge - full sized
  • coffee table
  • comfortable chairs (ideally a rocker or glider)

Wish List

  • CNC Mill

Shelving Specs

  • Main Shelves (5 shelves, along the wall as you enter the shop):
    • Height 14.25" clearance, except the second shelf up from the bottom has 17.5" of clearance, and there is just over 24" of clearance from the top shelf to the pipes.
    • Depth: 24" of shelf proper, plus another 2.75" to the wall.
    • Width: 44-46" between uprights, but shelves are open end-to-end.
  • Book shelves to the left of the nook: (6 shelves + long top shelf (not measured))
    • Height: 14", though each end of the shelf is only 12" (sideways 2x4 support for shelf above)
    • Depth:16" of shelf proper, plus another 2"(ish) to the wall
    • Width: 27" (barely)
  • Utility Shelves to the right of the nook: (5 shelves + long top shelf (not measured))
    • Height: 17" (bottom four shelves), 13" (5th shelf (below the long top shelf))
    • Depth: 19.5" of shelf proper, plus another 2"(ish) to the wall
    • Width:40" of shelf proper, plus another 1.5" to the whiteboard
  • Small nook (5 shelves, between previous two shelves):
    • Height: 13.75" (top shelf goes up into ceiling, not measured)
    • Depth:24.5" of shelf proper, plus another 2"(ish) to the back wall
    • Width: 51" support-to-support, plus about 1.5" on each side to the wall
Retrieved from "https://wiki.hackpgh.org/index.php?title=Tools_%26_Equipment&oldid=3400"