Tools: Difference between revisions

From HackPittsburgh Wiki
Jump to navigation Jump to search
No edit summary
(Redirected page to Tools & Equipment)
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Several recent donations have left us with a lot of stuff in the shop, some of it still not evaluated or categorized. While all the equipment is here for use in shop projects and by shop members, we have a few donations that are "Free to a Good Home". Other equipment should remain for common use.
#REDIRECT [[Tools & Equipment]]
 
Also see [[Tools_&_Equipment]] (these should probably be one page)
 
== Shelving Specs ==
* Main Shelves (5 shelves, along the wall as you enter the shop):
** Height 14.25" clearance, except the second shelf up from the bottom has 17.5" of clearance, and there is just over 24" of clearance from the top shelf to the pipes.
** Depth: 24" of shelf proper, plus another 2.75" to the wall.
** Width: 44-46" between uprights, but shelves are open end-to-end.
* Book shelves to the left of the nook: (6 shelves + long top shelf (not measured))
** Height: 14", though each end of the shelf is only 12" (sideways 2x4 support for shelf above)
** Depth:16" of shelf proper, plus another 2"(ish) to the wall
** Width: 27" (barely)
* Utility Shelves to the right of the nook: (5 shelves + long top shelf (not measured))
** Height: 17" (bottom four shelves), 13" (5th shelf (below the long top shelf))
** Depth: 19.5" of shelf proper, plus another 2"(ish) to the wall
** Width:40" of shelf proper, plus another 1.5" to the whiteboard
* Small nook (5 shelves, between previous two shelves):
** Height: 13.75" (top shelf goes up into ceiling, not measured)
** Depth:24.5" of shelf proper, plus another 2"(ish) to the back wall
** Width: 51" support-to-support, plus about 1.5" on each side to the wall
 
 
== Books ==
See following page: [[Books]]
 
== Current Inventory ==
'''For larger tools see:'''
*[[Equipment]]
 
'''Ham Radio'''
*Radio Shack HTX-202 2 Meter Handie Talkie
**Needs to be charged and tested.
**Reminder: Ham Radio requires a license to transmit, but everyone can listen.
 
'''Basic Hand Tools'''
*Flat head screwdrivers
*Phillips screwdrivers
*Box cutters
*Tape measures
*Vise-Grips
*Saws
 
'''Table Tools'''
*Drill Press
 
'''Miscellaneous'''
*Angle Grinder
*Welding machine
*Digital projectors (2)
*8.25" table saw with fence; could use a push miter.
*10" single-bevel miter saw
*Metal lathe
*Sony SCARA robot arm: can be freely gutted for parts
*Adept SCARA robot arm + controller: contact [[User:marek|Marek]] to discuss configuration for shop or project use
 
'''Misc. Shop Items'''
*Fridge - full sized
*coffee table
*comfortable chairs (ideally a rocker or glider)
 
'''Basic Hand Tools'''
*Hammers (claw, ball peen, mallet...)
*Hand Saws
*Pliers
*Needle-Nose Pliers
*Wire cutters
*Snips
*Hex (allen) wrenches (standard+metric)
*Square
*Level
*Clamps
*Glue Gun
*Heat Gun
*Label Maker
*2 small right angle screwdrivers
*2 6 pack Alligator clips
*1 pack 3" Colored Power Bit Set
*1 cable saw
*2 6-in-1 screwdrivers (double ended, double ended all the way!)
*1 32 piece 3" security bit set
*1 pack 5 misc. scissors
*1 bunker hill color security camera (wired)
*1 21 piece sae/metric combo 'go-thru' socket set
*3 50 piece misc. pegboard hooks
*2 5 pack 2" pegboard hooks
*1 200 piece spring assortment
*1 nibbling cutter
*1 8" T-Bevel
*1 aviation straight cut tin snips
*4 large spring clamps
*4 medium spring clamps
*4 small spring clamps
 
'''Electronics Tools'''
*Soldering guns
*Soldering stations
*De-soldering wicks (or tool)
*Tip cleaners
*Lighted Magnifying glass (boom style)
*mini-vise and/or gator clip style
*toaster oven for surface mount boards?
*Anti-static mats (optional if we're careful)
*Wire stripper
*Multimeters (many)
*Oscilloscopes (many)
*Logic Analyzer
*bench power supplies
*common components (LEDs, caps, resistors, wire, etc.)
*All sorts of [[ElectronicsShop]] supplies
 
 
'''Mechanics Tools'''
*Socket Set: 1/4, 3/8, 1/2 drives (std. & metric)
*Open-end & box wretches (std. & metric)
 
'''Electric Hand Tools'''
*Electric Drills & Chargers
*Dremels
*Scroll Saw
*LED flashlight
 
'''Woodworking Tools'''
*Band Saw
*Scroll Saw
*10" Table Saw
*Jointer
*Planer
 
'''Metalworking Tools'''
*Portable/Battery Powered Sawzall
*Chop Saw (cutting metal)
*Band Saw
 
'''Miscellaneous'''
*Propane Torch for soldering copper pipe
*Pegboard Hooks
*3"+ screws
*long throw screwdriver bits
*$1 4-bit interchangeable screwdriver
*Pulleys/Block'n'Tackle
*Epoxy for RFID reader enclosure
*Short/Step ladder
*Scissors/Shears
*Drill w/gearbox/variable speed. 3/8" chuck w/ 1/2" adaptor.
*Rolling toolchest
*Sawhorses
 
== Wish List ==
* Mini Lathe
* Mini Mill
* Industrial Sewing Machine
* Embroidery Machine
* Rotary table for a Manual/CNC Mill
* Plasma Cutter
* Large tool storage (Box)

Latest revision as of 08:38, 26 October 2019

Redirect to: