HP Design Jet 500 42" printer: Difference between revisions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
[[Category:Equipment]] | [[Category:Equipment]] | ||
= Large Format Printer | = HP Design Jet 500PS Large Format Printer = | ||
The large format printer is an HP Design Jet Print 500PS inkjet. | The large format printer is an HP Design Jet Print 500PS inkjet. |
Revision as of 19:48, 31 August 2020
HP Design Jet 500PS Large Format Printer
The large format printer is an HP Design Jet Print 500PS inkjet.
GENERAL WARNINGS
This reminder page is NOT a substitute for being trained on the CNC by a qualified HackPgh member.
This reminder page is NOT a substitute for using your brain and taking appropriate precautions.
ALWAYS wear SAFETY GLASSES when operating the CNC.
ALWAYS wear HEARING PROTECTION when operating the CNC.
ALWAYS follow all other relevant safety rules.
PRINTER SPECIFIC WARNINGs
The printer is equipped with an automatic cutting blade.
When adjusting paper, etc, be careful not to cut yourself on the cutting blade.
At the end of the print job the printer will cut the paper, be VERY CAREFUL not to reach into the printer while it is doing this.
Capabilities, Material Width, Resolution
The 500s is an inkjet that uses aqueous, dye based ink and prints up to 1200 x 600 DPI.
Maximum material width is 42".
The material length is effectively unlimited, i.e. as long as the roll of material.
The current roll of paper in the printer is 36" wide.
Note: if you're planning to laminate the printer, check the laminator page about material width.
Preparation
Note: All directions are as seen from facing the front of the printer.
Clean the dust off the printer.
Make sure the power cable is plugged in.
Make sure the ethernet cable is plugged in.
The power cable and ethernet plug into the back, left end of the printer.
Press the power button on the front, left of the printer to turn it on. A green light should come on near the power button.
The printer takes about 60 seconds to finish booting up. When it's ready to print, the LCd display on the right, front of the printeriwll say "Job Managment".
Adjust the Paper
Open the lid of the printer.
At the front, right end of the printer is a light blue plastic lever.
Lift the lever up to lift up the rollers that hold the paper in place so it doesn't slide left or right.
Note, you may want to hold onto the paper before lifting the lever, to prevent it from slipping backward out of the printer.
Adjust the paper, line up the right edge of the paper so it is parallel with the thin blue line that is slightly to the left of the light blue lever. You don't want any skew between the paper and the light blue line, otherwise the paper will skew sideways as it advances.
Press the light blue lever down to press the rollers down and lock the paper in place.
Close the lid of the printer.
Choose Paper on LCD Menu
Use the LCD menu to select which paper you're using.
Printer will advance and then retract the paper to determine if the paper skews.
If the paper skews, the printer will display a message telling you to correct the skew.
HP Design Jet Printing Software
The HP Printing software is already installed on the Beta desktop machine
To install it on your own machine, Windows users can download the HP printer software from:
Download the software, install it, open it, and add the printer.
Mac users can siply add the printer using the Add Printer function in the Mac settings.
Note: The printer must be on.
Printing using PC Printer Software
On the "Beta" Windows desktop machine you will find an application named "HP Instant Printing".
Note: HP Instant Printing does not do PNG, only JPEG.
Download your image to the Beta desktop machine.
Open HP Instant Printing, load the image in from wherever you put it.
Select the proper size. The printer's maximum size is 42" wide. The current roll of paper is 36" wide.
Select "Roll".
Choose the print settings (e.g. color or grayscale, quality level, etc).
Choose "Printable Area" in the setings.
Choose "Fit to Roll"
Print the image.
HP Resources, replacement parts
HP Design Jet 500 specifications
HP Design Jet Users Guide Page
Remanufactured Print Head replacements
Cartridge Replacements
Assembly & Setup Instructions
User's Reference Guide
Service Manual
Video on how to use it
Reviews
Support Page
Has a bunch of specification-type details, resolution, etc, including ink cartridges (listed below).
Ink and Printhead Replacement Pats
Ink Cartridges
HP no.10 Black, C4844A
HP no.82, Cyan, C4911A
HP no.82, Magenta, C4912A
HP no.82, Yellow, C4913A
Printheads
HP no.11, Black, C4810A
HP no.11, Cyan, C4811A
HP no.11, Magenta, C4812A
HP no.11, Yellow, C4813A